Avaya IP500 Analog Trunk Card (700503164)
In stock
☘ Likes 3 ☸ reviews 0
SKU
700503164
| Avaya 700503164 analog trunk card to any IP500 base card. This card only works with IP Office 500 V2. Four analog trunk ports, or four FXO ports, outfit this daughtercard. Connect analog trunks to the FXO analog ports. |
| Avaya IP500 Analog Trunk Card 4 V2 Universal (700503164) The Avaya IP500 Analog Trunk Card 4 V2 provides 4 additional analog trunk ports on your Avaya IP Office system. New: --> This product is eligible for 2 Year Platinum Protection! Avaya IP500 Analog Trunk 4 Features Connects to IP500 base card - When connected to IP500 base card, it provides 4 loop-start analog trunk ports Also provides DTMF, caller ID (ICLID), busy tone detection Adjustable echo cancellation - Selectable to Off, 8, 16, 32, 64, and 128 milliseconds Power Failure Transfer - When fitted to an IP500 analog phone base card. During power failure, the first extension port (port 1) is connected to the first analog trunk (port 9) Maximum - 4 per IP500 control unit Changes from V1 to V2 Echo Cancellation V1: Echo cancellation manually selectable to either 8, 16, 32, 64 or 128 milliseconds or Off. The default is 16 milliseconds. V2: Echo cancellation manually selectable to either On or Off. The default is On. The IP500 Analog Trunk Card V2 also supports echo reduction which is set to On by default. Service Status/Line Status Indication V1: Detection of individual line status for idle lines is not supported. Therefore, the card LEDs and System Status Application simply indicate that the card is installed and when the line is in use. V2: Automatic detection of line status for idle lines is supported. The card LEDs and System Status Application indicate that the individual line is connected and idle or is in use. Impedance Matching V1: For this card only manual impedance matching is useable and only in selected locales. V2: This card supports automatic impedance matching at system startup and this mode is enabled by default. Manual or no impedance matching can be used if required. Impedance matching is supported in all locales. Compatibility Only compatible with IP Office 8.1.63 (Feature Pack 1) or higher Requires an IP500 Digital Station 8, Analog Phone 2, Analog Phone 8, ETR 6, TCM 8, VCM 32, or VCM 64 |
Write Your Own Review
